Siemens SIMOTION D4x5 Series - Digital Inputs

General technical data
Table 5-9
Technical data (general)
Data SIMOTION
D425
SIMOTION
D435
SIMOTION
D445
SIMOTION
D445‑1
Fan Optional fan/
battery module
Optional fan/
battery module
Fan/battery
module
included in
scope of delivery
Double fan/
battery module
included in scope
of delivery
Power supply
●
Rated value
● Permissible
range
24 V DC
20.4 ... 28.8 V
24 V DC
20.4 ... 28.8 V
24 V DC
20.4 ... 28.8 V
24 V DC
20.4 ... 28.8 V
Current
consumption,
typically
1)
600 mA 600 mA 2 A 1 A
Starting current,
typ.
6 A 6 A 6 A 5 A
Power loss 15 W 15 W 48 W 24 W
1)
With no load on inputs/outputs, no 24 V supply via DRIVE‑CLiQ and PROFIBUS interfaces
Digital inputs
Table 5-10
Digital inputs on SIMOTION D4x5
Data SIMOTION D425 SIMOTION D435 SIMOTION D445/D445‑1
Digital inputs 8 8 8
Input voltage
● Rated value 24 V DC 24 V DC 24 V DC
● For signal "1" 15 ... 30 V 15 ... 30 V 15 ... 30 V
● For
signal "0"
2)
-3 ... +5 V -3 ... +5 V -3 ... +5 V
Galvanic isolation Yes, in groups of 4
1)
Yes, in groups of 4
1)
Yes, in groups of 4
1)
Current
consumption typ. at
signal level "1"
10 mA at 24 V 10 mA at 24 V 10 mA at 24 V
Input delay, typ.
(hardware)
L -> H: 50 µs
H -> L: 150 µs
L -> H: 50 µs
H -> L: 150 µs
L -> H: 50 µs
H -> L: 150 µs
1)
Reference potential is terminal G1 or G2
2)
The digital inputs are protected against polarity reversal up to -30 V
Technical data
5.1 Technical data D4x5
SIMOTION D4x5
70 Manual, 04/2014