Advanced commissioning
7.8 Safe Torque Off (STO) safety function
Proceed as follows to create the acceptance documentation for the drive using STARTER:
1. In STARTER, select "Create acceptance documentation":
STARTER has templates in German and English.
2. Select the suitable template and create a report for each drive of your machine or system:
– Template for the machine documentation:
de_G120x_Dokumentation_Maschine: German template.
en_G120x_Documentation_machine: English template.
– Report of the settings for the basic functions, from firmware version V4.4 onwards:
de_G120x_Basicc_V4.4…: German report.
en_G120x_Basic_V4.4…: English report.
3. You load the created reports for archiving and the machine documentation for further
processing:
4. Archive the reports and the machine documentation.
You have generated the documents to accept the safety functions.
The reports and the machine documentation can also be found in the section: Acceptance
tests for the safety functions (Page 310).
Converter with control units CU240D-2
216 Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
To Next Page
Loading...
