Appendix
A.3 The device trace in STARTER
The device trace in STARTER
Description
The device trace graphically displays inverter signals with respect to time.
In two settings that are independent of one another, using you can interconnect eight
signals each.
You can start a measurement as frequently as you require. As long as you do not exit
START, the results remain under the "Measurements" tab with data and time. When
terminating STARTER or under the "Measurements" tab, you can save the measurement
results in the *.trc format.
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
301
To Next Page
Loading...
