Advanced commissioning
7.2 Inverter control
This chapter describes how you adapt the function of individual digital and analog inputs and
outputs of the inverter.
Figure 7-2 Internal interconnection of the inputs and outputs
Digital inputs
Changing the function of a digital input
Interconnect the status parameter of the digital input wit
h a
binector input of your choice.
Binector inputs are marked with "BI" in the parameter list of
the List Manual.
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
117
To Next Page
Loading...
