Siemens SINAMICS G120D Series - Page 59

Installation
4.2 Electrical Installation
Default setting 25: "Distributed conveyor systems with fieldbus, safety"
DO 0: p0730, DO 1: p0731
DI 0: r0722.0, …, DI 5: r0722.5
p2081[0] = r0722.0, …, p2081[3] = r0722.3
p0730 = r2094.0, p0731 = r2094.1
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
59