SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
11
The SINAMICS V-ASSISTANT engineering tool is designed for faster commissioning and
diagnostics for the following SINAMICS V90 drive variants:
● SINAMICS V90 drives with the PROFINET interface (referred to as SINAMICS V90 PN)
● SINAMICS V90 drives with the pulse train, USS/Modbus interface (referred to as
SINAMICS V90 PTI)
The software runs on a personal computer with Windows operating systems and utilizes
graphical user interface to interact with users and communicates with SINAMICS V90 via a
USB cable. It can be used to modify parameters and monitor status of SINAMICS V90 drives.
Note
To ensure the stability of online commissioning, Siemens recommends that you use a
shielded USB cable of no longer than 3 m with ferrite cores on both ends.
Note
The minimum screen resolution must b
e 1024 × 768.
To Next Page
Loading...
