Task navigation
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
87
You can configure all editable parameters in this field:
this icon is only available for V90 PTI. A parameter with this icon in the above list
indicates that it is related to Modbus communication. You can click on this icon to call the
online help for Modbus communication.
parameters with this icon in the above list indicate they are indexed parameters. By
default, the first index of each indexed parameter is displayed. To view all indices of an
indexed parameter, click on this icon.
Note
Can be changed
The parameters can be changed in two states. You can see the attribute of each parameter
in Section "Parameter list" in the online help. The online help can be called by pressing F1
key.
U (Run): Can be changed in the "Running" state when the drive is in "S ON" state.
T (Ready to run): Can be changed in the "Ready" state when the drive is in "S OFF"
state.
To Next Page
Loading...
