User interface
3.3 Menu bar
SINAMICS V-ASSISTANT Online Help
32 Operating Manual, 04/2017, A5E36618042-003
This menu contains the following menu commands:
● Tools -> Save parameters to ROM (Page 32)
● Tools -> Restart drive (Page 32)
● Tools -> Reset absolute encoder (Page 33)
● Tools -> Factory default (Page 33)
● Tools -> Upload parameters (Page 35)
Tools -> Save parameters to ROM
You can use this menu command to save the parameters from RAM to ROM in the drive.
The following window appears to display the saving process:
Alternatively, you can use from the toolbar.
You can use this menu command to restart the drive. After you select this menu command,
the following reminder appears:
If you click , then the following information window appears:
To Next Page
Loading...
