Task navigation
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
51
This function is only available in online mode. You can configure this function on the
following panel:
In online mode, the IP address of the connected drive is displayed in area "②" automatically.
You can define the PN name of station in area "
①". Note that only numbers (0 to 9),
lowercase letters ("a" to "z") and characters ("-" and ".") in English are permissible. In
addition, you can modify the IP address in area "
②" as desired. Click button "③" to save
and activate the settings. Restart the drive and then the PN name and IP address you set
become active and appear in areas "
④" and "⑤".
also configured the IP protocol in TIA portal, then the IP protocol set in TIA portal
takes the first priority and displays in area "⑤
" as the actual active IP protocol.
To Next Page
Loading...
