Siemens SINAMICS V90 - Edit -> Copy; Edit -> Paste; Switch Menu; Switch -> Go Offline

User interface
3.3 Menu bar
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
31
3.3.3.2
Edit -> Copy
The command copies the selected objects, for example, parameter values, article number or
the rated power of the drive or motor, to the clipboard.
Alternatively, you can use
from the toolbar.
Note
You can only use this menu command on the following function panes:
•
Selecting drive (Page 42)
•
Selecting motor (Page 44)
•
Viewing all parameters (Page 87)
•
Signal (Page 90)
3.3.3.3
Edit -> Paste
This menu command copies the clipboard content to the input field. The copied content can
be inserted at a position determined with a mouse click.
Alternatively, you can use
from the toolbar.
Note
You can only use this menu command to modify the values in
Viewing all parameters
(Page
87).
3.3.4
Switch menu
This menu contains the following two commands for switching SINAMICS V-ASSISTANT
between the online mode and offline mode.
●
Go offline (Page 31)
●
Go online (Page 31)
3.3.4.1
Switch -> Go offline
When SINAMICS V-ASSISTANT is working in online mode, you can use this menu
command to switch it to offline mode.
Alternatively, you can use
from the toolbar.
3.3.4.2
Switch -> Go online
When SINAMICS V-ASSISTANT is working in offline mode, you can use this menu
command to switch it to online mode.
Alternatively, you can use
from the toolbar.