Siemens SINAMICS V90 - Tools -> Upload Parameters; Help Menu; Help -> View Help

User interface
3.3 Menu bar
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
35
3.3.5.5
Tools -> Upload parameters
Note
This menu command is only available in online mode.
You can use this menu command to upload parameters from the drive to SINAMICS V-
ASSISTANT. After you select this menu command, the following window appears to show
the process:
After the process is complete, the values of the same parameters in SINAMICS V-
ASSISTANT are overwritten by those in the drive automatically.
3.3.6
Help menu
The online help quickly provides you with information about drive selection, parameterization,
commissioning and diagnostics of SINAMICS V-ASSISTANT.
● Help -> View help (Page 35)
● Help -> About SINAMICS V-ASSISTANT... (Page 36)
3.3.6.1
Help -> View help
You can use this menu command to display the content of SINAMICS V-ASSISTANT Online
help.