Task navigation
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
123
With this function, you can trace the performance of the connected drive in the current
control mode on the following panel:
Trace configu-
ration
Opens the window of trace configuration
For more information, see Section "Trace configuration
Start/stop trace
(
available
in online mode)
Starts recording the current trace
If you desire to stop the trace process, click the following
button:
②
Cursors
Changes the cursor shape from cross to arrow
When the cursor appears as an arrow, you can directly
select a curve and use it for variable calculation.
The selected curve is displayed highlighted.
If you click this button, you can move the selected curve
freely after the cursor appears in the shape of a hand.
To Next Page
Loading...
