User interface
3.1 Working modes
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
21
If you select the second option, you need to select an existing project in the following
directory as the current project and enter the main window:
Default location: xxx/Siemens/V
-ASSISTANT/Project
xxx: SINAMICS V-ASSISTANT setup root directory
Only .prj format is available.
In the main window of SINAMICS V-ASSISTANT, the current working mode is indicated by
the status indicators at the upper right of the main window:
You can switch the working mode between the two modes. For more information, see
Section "Switch menu (Page 31)".
To Next Page
Loading...
