Task navigation
SINAMICS V-ASSISTANT Online Help
64 Operating Manual, 04/2017, A5E36618042-003
If you desire to configure the task settings of the traversing block, you can click
to open the following window:
Click
to expand the drop-down lists. Select your desired type of 2621, positioning
mode, continuation condition as well as IDs and then close the window.
● EPOS Jog
Enter the desired traversing distance and velocity setpoint for Jog 1 or Jog 2 in the above
window.
● MDI Positioning
Enter the desired MDI position, MDI velocity, MDI acceleration override and MDI
deceleration override of the fixed setpoint. Click
to expand the drop-down lists of the
MDI positioning type and absolute positioning direction. Select your desired settings and
close the windows.
To Next Page
Loading...
