Siemens SINUMERIK 808D ADVANCED - Page 478

Parameter Manual
478 Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
EXACT_POS_MODE_G0_TO_G1
MD 20552, 138
EXTENSIONS_OF_BIN_FILES
MD 17000, 80
EXTERN_DIGITS_OFFSET_NO
MD 10889, 52
EXTERN_DIGITS_TOOL_NO
MD 10888, 52
EXTERN_DOUBLE_TURRET_DIST
MD 42162, 311
EXTERN_FLOATINGPOINT_PROG
MD 10884, 51
EXTERN_FUNCTION_MASK
MD 20734, 143
EXTERN_G_NO_MAC_CYCLE
MD 10816, 50
EXTERN_G_NO_MAC_CYCLE_NAME
MD 10817, 50
EXTERN_G0_LINEAR_MODE
MD 20732, 142
EXTERN_GCODE_GROUPS_TO_PLC
MD 22512, 155
EXTERN_GCODE_RESET_MODE
MD 20156, 118
EXTERN_GCODE_RESET_VALUES
MD 20154, 117
EXTERN_INCREMENT_SYSTEM
MD 10886, 52
EXTERN_INTERRUPT_BITS_M96
MD 10808, 48
EXTERN_INTERRUPT_NUM_ASUP
MD 10818, 50
EXTERN_INTERRUPT_NUM_RETRAC
MD 10820, 50
EXTERN_M_NO_MAC_CYCLE
MD 10814, 49
EXTERN_M_NO_MAC_CYCLE_NAME
MD 10815, 50
EXTERN_MEAS_G31_P_SIGNAL
MD 10810, 49
EXTERN_PARALLEL_GEOAX
MD 22930, 164
EXTERN_REF_POSITION_G30_1
MD 43340, 328
EXTERN_RIGID_TAPPING_M_NR
MD 20095, 96
EXTERN_TOOLPROG_MODE
MD 10890, 53