Siemens SINUMERIK 840 Planning Guide

9 Examples 11.92
9.1.24 Display "Unload to NC program"
Softkey "SELECT"
The following unload procedure types can be selected:
– All magazines
(unloads the tools from all magazines; back-up)
– Magazine ”x” to ”y”
(unloads the tools from a series of magazines)
– Magazine ”x” and chained magazines
(unloads the tools from one magazine and its chained magazines)
– Marked tools
(unloads the marked tools of all magazines)
The type of unloading procedure selected is displayed by a select bit "*".
Softkey ”START”
Activates the function "Unload to NC program". The unloading cycle (L 947) is selected and
NC Start is triggered. The loading program % 9999 must be deleted before the function can
be activated.
9–26
© Siemens AG 1991 All Rights Reserved 6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)

Siemens SINUMERIK 840 Specifications

General

Control Type	CNC
Axes	Up to 31
Display	TFT color display
PLC	Integrated
HMI	SINUMERIK Operate
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Type	CNC system
Programming Languages	G-code
Max Number of Channels	10
Operating Temperature	0 to 45 °C
Relative Humidity	Up to 95% (non-condensing)
Protection Class	IP54 (front panel)