Siemens SINUMERIK 840 Planning Guide

10 Data fields 01.91
10.2.4 User interface
Data for the chained magazine
Data
word
No.
High-order byte (DL)
Bit 15
Low-order byte (DR)
Bit 15
Bit 15
Bit 0
Bit 0
Bit 0
DW 77
DW 78
DW 79
Data word number within the magazine table (see D 71.8)
Magazine location number of the tool found (see D 71.8)
Current actual position of the assigned magazine (see D 71.8)
where tool was found
10–36 © Siemens AG 1991 All Rights Reserved 6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)

Siemens SINUMERIK 840 Specifications

General

Control Type	CNC
Axes	Up to 31
Display	TFT color display
PLC	Integrated
HMI	SINUMERIK Operate
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Type	CNC system
Programming Languages	G-code
Max Number of Channels	10
Operating Temperature	0 to 45 °C
Relative Humidity	Up to 95% (non-condensing)
Protection Class	IP54 (front panel)