Siemens SINUMERIK 840Di - Page 469

06.03
15.2 Software installation/update
15-469
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
PLEASE SELECT:
1 Connect to Network Drive
2 Show Connected Network Drives
3 Disconnect from all Network Drives
4 Change install directory
5 Install from H:<PFAD>
9 Return to previous Menu
Your Choice [1,2,3,5,9] ?
Connected Network Drive (last) H: (\\R3344\MY_INSTALL)
Install Directory H:\<PATH>
7. To start the data transfer, choose Install from H:<PATH> using the key “5”.
– When the transmission is complete, the PCU will reboot.
When the control is booted for the next time under Windows NT, the software
(setup.exe) contained in the installation directory D:\INSTALL is installed auto-
matically.
15 SW Installation/U
p
date and Data Backu
p