Siemens SINUMERIK 840Di - Page 470

06.03
15.2 Software installation/update
15-470
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Use the menu item Show connected Network Drives to display all network
drives currently linked with the PCU.
PLEASE SELECT:
1 Connect to Network Drive
2 Show Connected Network Drives
3 Disconnect from all Network Drives
4 Change install directory
5 Install from H:<PATH>
9 Return to previous Menu
Your Choice [1,2,3,5,9] ?
Choose Show Connected Network Drives using the key “2”.
Status Local Name Remote Name
OK H: \\R3344\MY_INSTALL
Use the menu item Disconnect from all Network Drives to disconnect all links
to network drives.
PLEASE SELECT:
1 Connect to Network Drive
2 Show connected Network Drives
3 Disconnect from all Network Drives
4 Change install directory
5 Install from H:<PATH>
9 Return to previous Menu
Your Choice [1,2,3,5,9] ?
Choose Disconnect form all Network Drives using the key “3”.
The network connections are then displayed in the Service menu as -none-.
Connected Network Drives (last): -none-
Install Directory: H:\<PATH>
SHOW connected
network drives
DISCONNECT from
all Network Drives
15 SW Installation/U
p
date and Data Backu
p