Siemens SIPROCESS GA700 - Keys with special functions; Cursor and command keys

Table 5-9 Plug&Measure-AM slot change
Case Description Data synchronization/Action
PM AMx
Un‐
change
d
AM1 →
AM2
AM2 →
AM1
Internal swapping of modules between
slots is not permitted!
Install the modules once again in their
previous slot and restart the device.
None
Un‐
change
d
AM1 = 0
AM2 →
AM1
An AM is removed.
Retro󹪝tting: Remaining AM is inserted in
the slot that has opened up
Automatic data synchronization, no ac‐
tion required by user.
Combined operation
5.5Plug & measure permitted activities
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB 57