Siemens Siprotec 7SD600 User Manual

' $ ! $!& #$"&&"!  Ċ (%& !' $$ !" 
 

3 - 4
Siemens AG ⋅ January 1999
Table 3.3 Electrical tests
EMC Tests on
Emitted Interference
EN 50081-* (Basic SpeciĆ
fication)
Radio Interference Voltages on Lines, only auxiliary
supply voltage, EN 55022, DIN VDE 0878 Part 22, IEC
CISPR 22
Interference Field Strength
EN 55011, DIN VDE 0875 Part 11, IEC CISPR 11
150 kHz to 30 MHz, Limit Class B
30 to 1ā000 MHz, Limit Class A
Vibration and Shock
Stress during
Stationary Use
IEC 60255-21-1, IEC
60068-2
Vibration
IEC 60255-21-1, Class II
IEC 60068-2-6
Shock
IEC 60255-21-2, Class I
Vibration during Earthquake
IEC 60255-21-3, Class 1
IEC 60068-3-3 hor. axis
vert. axis
Sinusoidal
10 to 60 Hz,
"0.075 mm amplitude; 60 to 150
Hz; 0.5  acceleration; frequency sweep 1 ocĆ
tave/min; 20 cycles in 3 axes vertical to one
another
Semi-sinusoidal
Acceleration 5 , duration 11 ms, per 3 shocks
in both directions of the 3 axes
Sinusoidal
1to8Hz:
"3.5 mm amplitude
8to35Hz:1 acceleration
1to8Hz:"1.5 mm amplitude
8 to 35 Hz: 0.5  acceleration
Frequency sweep 1 octave/min
1 cycle in 3 axes, vertical to one another
Table 3.4 Mechanical tests
Vibration and Shock
Stress during Transport
IEC 60255-21, IEC
60068-2
Vibration
IEC 60255-21-1, Class II
IEC 60068-2-6
Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
Bump
IEC 60255-21-2, Class 1
IEC 60068-2-29
Sinusoidal
5to8Hz:
"7.5 mm amplitude; 8 to 150 Hz: 2
 acceleration; frequency sweep 1 octave/min:
20 cycles in 3 axes, vertical to one another
Semi-sinusoidal
15 acceleration, duration 11 ms, per 3 shocks
in both directions of the 3 axes
Semi-sinusoidal
10  acceleration, duration 16 ms, per
1000 shocks in both directions of the 3 axes
Table 3.5 Climatic Stress
Climatic Stress
EN 60255-6
IEC 60255-6
VDE 0435 P t 303
Limit temperature during operation
(recommended)
durin
g
stora
g
e
-20 to +70 _C
-5 to +55 _C
-25 to +55 _C
(Readability of display
may be impaired
df55_C)
VDE 0435 Part 303
during storage
during transport
Storage and transport with works packaging!
25 to +55 C
-25 to +70 _C
upwar
d
so
f
55 _
C)
Humidity stress during operation Yearly mean v75 % relative humidity, on
56 days in the year up to 95 % relative humiĆ
dity, moisture condensation not permissible
We recommend that the devices are installed so that they are not subject to direct sunlight and strong fluctuations in temperature
which could lead to moisture condensation.

Siemens Siprotec 7SD600 Specifications

General

Brand	Siemens
Model	Siprotec 7SD600
Category	Protection Device
Language	English