Device Functions
SIRIUS 3RW44 System Manual
6-18 GWA 4NEB 535 2195-02 DS 04
6.5 Current Limits for Load Monitoring
It is possible to set maximum and minimum current limits; if these limits are
exceeded or undershot, a message can be output.
Minimum current
limit
The minimum current limit can, for example, be used to indicate a V-belt break
and the corresponding no-load current of the motor or that the fan filter is
clogged.
Maximum current
limit
The maximum limit value can be used to determine increased power loss in the
application, e.g. caused by storage damage.
To Next Page
Loading...
