SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04
8-1
PROFIBUS DP Communication Module 8
Section Subject Page
8.1 Introduction 8-4
8.1.1 Definitions 8-5
8.2 Data Transmission 8-6
8.2.1 Data Transmission Options 8-6
8.2.2 Communication Principle 8-6
8.3 Installation of the PROFIBUS DP Communication Module 8-7
8.3.1 Insertion of the PROFIBUS DP Communication Module (Field
Bus Interface)
8-7
8.4 Activating the PROFIBUS DP Communication Module (Field Bus
Interface) and Setting the Station Address
8-9
8.4.1 Introduction 8-9
8.4.2 Activating the PROFIBUS DP Communication Module via the
Display, Setting the Station Address and Saving the Settings
8-10
8.4.3 Activating the PROFIBUS DP Communication Module (Field Bus
Interface) and Setting the Station Address via the Device
Interface using the "Soft Starter ES Professional" or the "Soft
Starter ES Smart + SP1" Software
8-13
8.5 Soft Starter Configuration 8-15
8.5.1 Introduction 8-15
8.5.2 Configuration with the GSD File 8-15
8.5.3 Configuration using the Soft Starter ES Professional Software 8-16
8.6 PROFIBUS DP Commissioning using the GSD File in STEP 7
(Example)
8-17
8.6.1 Introduction 8-17
8.6.2 Configuration using the Device Master File (GSD) in STEP 7 8-19
8.6.3 Integration into the User Program 8-21
8.6.4 Switching On 8-21
To Next Page
Loading...
