Configuration Instructions
SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04
2-7
2.5 Factory Settings
Apply the factory settings (default settings)
• in the event of faulty parameterization
• if SIRIUS 3RW44 soft starters that have already been parameterized are to be
further used in other systems.
Note
If this is not done, the present parameterization might cause drives to start
running.
Soft starters already parameterized by the operator can be set back to the
factory setting without requiring additional auxiliary tools.
To reset to the factory settings, refer to "Restoring the factory settings" on
Page 5-40.
To Next Page
Loading...
