Siemens SIRIUS 3RW55 - 7.13 Outputs

Functions
7.13 Outputs
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
139
7.13
Outputs
7.13.1
Digital outputs
Operating principle
The soft starter has four digital outputs with which external actuators, such as a braking
contactor or a signal lamp are controlled.
Using the output actions, you can assign an output action to each digital output. Output 3 is
permanently assigned to the output action "Group error". Each output can be independently
assigned an output action.
Parameters
Parameters
Description
ON delay time
The switching of the output is delayed by this time.
• Factory setting: 0 s
• Setting range: 0 ... 6 500 s
• Increment: 0.1 s
OFF delay time