Siemens SIRIUS 3RW55 - Defining the Local Access Protection (PIN)

Functions
7.18 3RW5 HMI High Feature
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
167
7.18.9.2
Defining the local access protection (PIN)
Operating principle
You can protect the 3RW5 HMI High Feature against unauthorized access by issuing a
4-digit HMI PIN.
Requirements
● Access protection to the 3RW5 HMI High Feature is not active or has been reset.
● You are in the "Security > Local Access Protection" menu.
Procedure
Define PIN
1. Select the
"
Define PIN" menu.
In the factory setting, no HMI PIN is active.
2. Define a 4-digit HMI PIN and confirm with "OK".
A pop-up window opens in which you can verify the HMI PIN.
3. Enter the HMI PIN again to confirm it and then click on "OK".
The HMI PIN has been defined and is active.
Change PIN
1. Select the "Change PIN" menu.
2. Enter the current HMI PIN in the pop-up window and confirm with "OK".
The correct entry of the HMI PIN is checked.
3. Specify a new 4-digit HMI PIN and confirm with "OK".
The HMI PIN has been changed.
Delete PIN
1. Select the "Delete PIN" menu.
2. Enter the current HMI PIN in the pop-up window and confirm with "OK".
The correct entry of the HMI PIN is checked.
The HMI PIN has been deleted. You can now set a new HMI PIN.