Siemens SIRIUS 3RW55 - Glossary

SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
231
Glossary
Ground fault
Fault whereby an external conductor comes into contact with ground or the grounded neutral
point.
GSD
Device master file
This file is required to be able to configure a device as a DP standard slave in the HW Config
of a Siemens or external system.
GSDML
Device master file
This file is required to be able to configure a device as a DN device in the HW Config of a
Siemens or external system.
HSP
Hardware support package
The hardware support packages allow you to configure modules that are not listed in the
hardware catalog of your TIA Portal installation.
PII/PIQ
Process image input/process image output
Process image
Image of the signal states of the digital inputs and outputs in the memory of a controller.
The process images can be transferred as follows:
● Cyclically in the fieldbus protocol
● Acyclically using data sets
STS
Simulation Tool for Soft Starters
The soft starter can be configured with the STS (Simulation Tool for Soft Starters) software.
The STS suggests suitable soft starters for the application based on the motor and load data
and application requirements that you enter.