Siemens SIRIUS 3RW55 - 3 Mounting and Dismantling; 3.1 Mounting the 3 RW55 Soft Starter

SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
41
Mounting and dismantling
3
3.1
Mounting the 3RW55 soft starter
Procedure
1. Mount the 3RW55 soft starter on a level surface. (Page 43)
2. Ensure that the permissible temperature range and the necessary clearances are
complied with.
Technical data in Siemens Industry Online Support (Page 195)
3. Optionally mount the fan cover. (Page 42)
4. Optionally install the communication module.
You will find further information in the manual for the 3RW5 communication module in
question.
Result
The 3RW55 soft starter is now mounted and ready for connection.
The 3RW5 HMI High Feature can be removed and installed in a control cabinet door, for
example.
Removing the 3RW5 HMI High Feature (Page 45)
Installing the 3RW5 HMI High Feature in the control cabinet door (Page 48)
Installing the High Feature 3RW5 HMI on a flat surface (Page 47)