Siemens SIRIUS 3RW55 - Restoring the Factory Settings Via High Feature 3 RW5 HMI

Maintenance and service
9.3 Restoring factory setting
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
193
9.3.1
Restoring the factory settings via High Feature 3RW5 HMI
Requirements
● Access protection to 3RW5 HMI High Feature is not active or has been removed.
● You are in menu "Parameters > Factory Settings"
Procedure
1. Select the desired menu item.
– 3RW5 soft starter
– Communication
– 3RW5 HMI High Feature
– All
2. Confirm the menu item.
Result
The factory setting of the selected device or all devices is restored.
Note the effects of the factory settings described in Chapter Restoring factory setting
(Page 192).