Siemens SIRIUS 3RW55 - Execute HMI Diagnostics with the 3 RW5 HMI High Feature

Messages and diagnostics
8.8 Execute HMI diagnostics with the 3RW5 HMI High Feature
SIRIUS 3RW55 soft starter
186 Manual, 08/2018, A5E35630887002A/RS-AB/002
8.8
Execute HMI diagnostics with the 3RW5 HMI High Feature
Requirements
● You are in the "Diagnosis > HMI" menu.
Parameters
Diagnostic value
Comment
Diagnosis state
Shows all active diagnostic messages.
Self-test Test LEDs The device LEDs of the 3RW5 HMI High Feature are
tested one after the other. The display of the 3RW5
HMI High Feature shows which device LED is currently
being controlled. You can navigate through the test
operation with the "OK" key.
Test buttons The 3RW5 HMI High Feature keys/buttons are tested
one after the other. The display of the 3RW5 HMI High
Feature indicates what key has to be pressed.
Test display The 3RW5 HMI High Feature runs a color program on
the display. Navigate through the test operation with
the "OK" key.