Maintenance and service
9.3 Restoring factory setting
SIRIUS 3RW55 soft starter
194 Manual, 08/2018, A5E35630887002A/RS-AB/002
Restoring the factory settings with the Master RESET button via
3RW5 HMI High Feature
Requirements
● Free access to the Master RESET key of the 3RW5 HMI High Feature
Removing the 3RW5 HMI High Feature (Page 45)
● 3RW5 HMI High Feature is connected to the soft starter via the HMI connecting cable.
1. Press the Master RESET key on the rear of the 3RW5 HMI High Feature.
The menu for restoring the factory setting appears on the display.
2. Select the desired menu item.
– 3RW5 soft starter
– Communication
– 3RW5 HMI High Feature
– All
3. Confirm the menu item with "OK".
The factory setting of the selected device or all devices is restored.
Note the effects of the factory settings described in Chapter Restoring factory setting
(Page 192).
To Next Page
Loading...
