Siemens SIRIUS 3RW55 - Performing Firmware Update with Micro SD Card (3 RW5 HMI High Feature)

Maintenance and service
9.2 Performing firmware update with micro SD card (3RW5 HMI High Feature)
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
191
9.2
Performing firmware update with micro SD card
(3RW5 HMI High Feature)
Requirements
● Micro SD card with valid firmware file (*.udp)
● You are in the "Micro SD card > FW Update" menu.
Procedure
Note
Access to micro SD card.
Please note that the micro
SD card is inserted in the 3RW5 HMI High Feature during
updating of the firmware.
Premature removal of the micro
SD card from the 3RW5
HMI High Feature is not permissible
and will terminate updating
of the firmware. Data could also be lost.
● Select the folder of the respective device.
● Select the firmware file of the device and confirm with "OK".
You can see the firmware update is being performed from the progress bar on the
display.
Following successful updating of the firmware, the respective device then restarts
automatically.
● Check the new firmware version in the "Overview" menu.
Result
You have performed a firmware update for the selected device using the micro SD card. The
firmware update is documented in the device logbook.