Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI High Feature
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
51
Replacing the hinged cover of the 3RW55 soft starter
Requirements
● Optional accessories:
– Hinged cover without cutout
Damage to the HMI display.
Ensure that the display of the HMI does not sustain damage when replacing the hinged
cover.
● Open the hinged cover ① at an angle of approx. 20°.
● Loosen the hinges vertical to the soft starter surface
② + ③ starting from the bottom.
● Take the cover off the 3RW55 soft starter.
● Follow the steps in reverse order to install the replacement hinged cover.
To Next Page
Loading...
