EasyManua.ls Logo

Siemens SITOP PSU8600 - Page 339

Siemens SITOP PSU8600
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
339
Display name
Data type
Definition
Description
Alarm_F_Overtemperature Boolean PropertyType Buffer component overtemperature
detected. Depending on the system
configuration, buffering is either
restricted or no longer possible.
Alarm_F_OvertemperatureModule Boolean PropertyType Buffer component overtemperature
detected. Depending on the system
configuration, buffering is either
restricted or no longer possible.
Alarm_F_SoftwareUpdating Boolean PropertyType Performing firmware update.
Read/write access is currently not
possible.
Alarm_F_UnexpectedEmptySlotDe-
tected
Boolean PropertyType Unexpected empty slot detected
Alarm_F_UzkHigh Boolean PropertyType Invalid internal supply voltage.
Buffer component disabled.
Alarm_F_WrongChecksum Boolean PropertyType Defective firmware detected. De-
vice must be reactivated with a
new firmware update.
Alarm_MD_General Boolean PropertyType General critical error occurred. The
device may therefore behave in-
consistently.
Alarm_MD_InconsitentBatteryType Boolean PropertyType Different battery types connected.
Only batteries of the same type can
be operated together.
Alarm_MD_LessCapableModule
Detected
Boolean PropertyType A module with reduced power was
detected. Deviating system behav-
ior may be possible.
Alarm_MD_ModuleParameters
Corrupt
Boolean PropertyType Stored module configuration is
corrupt. Deviating module behavior
may be possible.
Alarm_MR_NoBatteryConnected Boolean PropertyType Attempting to access a battery that
is not available. Either the battery
with the requested number was
never connected or communication
with this battery was interrupted.
Alarm_MD_Overtemperature Boolean PropertyType Danger of overtemperature detect-
ed in a system component. Imme-
diate load reduction is
recommended.
Alarm_MD_OvertemperatureMo-
dule
Boolean PropertyType Danger of overtemperature detect-
ed in a system component. Imme-
diate load reduction is
recommended.
Alarm_MD_ReverseBatteryPolarity
Detected
Boolean PropertyType Wrong battery polarity - check
battery connections.
Alarm_MR_BatteryCommunication
Disconnected
Boolean PropertyType Communication to the battery is
interrupted. Buffering is still possi-
ble, the battery charge level has
been reduced to a minimum how-
ever.

Table of Contents

Other manuals for Siemens SITOP PSU8600

Related product manuals