EasyManua.ls Logo

Siemens SITOP PSU8600 - Page 340

Siemens SITOP PSU8600
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
340 Manual, 09.2018, A5E36758446-5-76
Display name
Data type
Definition
Description
MR_BatteryDisconnectedSubslot1 Boolean PropertyType The connection to the battery is
lost either due to disconnection
(power or communication) or re-
moval of the battery. (Sub-slot 1)
MR_BatteryDisconnectedSubslot2 Boolean PropertyType The connection to the battery is
lost either due to disconnection
(power or communication) or re-
moval of the battery. (Sub-slot 2)
MR_BatteryDisconnectedSubslot3 Boolean PropertyType The connection to the battery is
lost either due to disconnection
(power or communication) or re-
moval of the battery. (Sub-slot 3)
MR_BatteryDisconnectedSubslot4 Boolean PropertyType The connection to the battery is
lost either due to disconnection
(power or communication) or re-
moval of the battery. (Sub-slot 4)
MR_BatteryDisconnectedSubslot5 Boolean PropertyType The connection to the battery is
lost either due to disconnection
(power or communication) or re-
moval of the battery. (Sub-slot 5)
Alarm_MR_BatteryPowerlineDis-
connected
Boolean PropertyType The power connection to the bat-
tery is interrupted. The battery can
no longer be buffered or charged.
Alarm_MR_BufferStateBuffering Boolean PropertyType The power supply system is sup-
plied via the buffer components.
Alarm_MR_ExceedingBatteryCount Boolean PropertyType More than 5 batteries are connect-
ed. Connect a maximum of 5 bat-
teries to the Energy Storage Link.
Alarm_MR_General Boolean PropertyType General error occurred. Device
behavior remains consistent, how-
ever.
Alarm_MR_ModuleParameters
Corrupt
Boolean PropertyType Stored module configuration is
corrupt. Module behavior remains
consistent, however.
Alarm_MR_MoreCapableModule
Detected
Boolean PropertyType A module with excessive power
was detected. Normal operation of
the system is possible.
Alarm_MR_NewModuleDetected
Boolean
PropertyType
New unconfigured module detected
Alarm_MR_UnexpectedModuleDe-
tected
Boolean PropertyType Unexpected module type detected.
Alarm_N_BufferingDisabledBy
Contact
Boolean PropertyType Buffer component disabled via
control contact
Alarm_N_BufferStateFull Boolean PropertyType Ready for buffering. Energy stor-
age fully charged.
Alarm_N_BufferStateNotFull Boolean PropertyType Limited buffer capacity. Energy
storage is not fully charged.
Alarm_N_BufferTimerExceeded Boolean PropertyType The configured maximum buffer
time has expired. The output is
switched off.

Table of Contents

Other manuals for Siemens SITOP PSU8600

Related product manuals