To Next PageTo Next PageWhat causes Siemens Power Supply shutdown due to phase failure?
The Siemens Power Supply shuts down due to phase failure or unbalanced supply voltage because of operation for an impermissibly long duration under these conditions. All outputs of the power supply system have been switched off as a result.
What happens when Siemens Power Supply shutdown due to overtemperature?
When the Siemens Power Supply shuts down due to overtemperature, it means overtemperature in a system component was detected. As a result, all outputs of the power supply system have been switched off.
Why did my Siemens Power Supply shutdown due to impermissible supply voltage?
The Siemens Power Supply shut down because the supply voltage is outside the permissible limits. Consequently, all outputs of the power supply system have been switched off.
Why is my Siemens SITOP PSU8600 showing system overload?
If your Siemens Power Supply experiences a system overload, it's because the system load current is outside the permissible overload profile. Consequently, the outputs of all expansion modules have been switched off.
What does prewarning system overload mean for Siemens SITOP PSU8600 Power Supply?
A prewarning system overload for Siemens Power Supply indicates that the system load current is above the specified warning threshold. However, operation can continue without restrictions.
General| Output Voltage | 24 V DC |
|---|---|
| Protection Features | Overload, short-circuit, overvoltage, overtemperature |
| Mounting Type | DIN Rail |
| Output Current | 40 A |
| Operating Temperature | -25 to +70 °C |
| Communication | Ethernet, PROFINET |
