A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 157
mmmmm
Parameters
2.7.2.2.8. Peak 3 End Time
Sets the end time of the high energy cost period 3.
Used in conjunction with
2.7.2.2.7.Peak 3 Start Time
to define the
high cost period.
2.7.2.2.9. Peak 4 Start Time
Sets the start time of the high energy cost period 4.
Used in conjunction with
2.7.2.2.10.Peak 4 End Time
to define the high
cost period.
2.7.2.2.10. Peak 4 End Time
Sets the end time of the high energy cost period 4.
Used in conjunction with
2.7.2.2.9.Peak 4 Start Time
to define the
high cost period.
2.7.2.2.11. Peak 5 Start Time
Sets the start time of the high energy cost period 5.
Used in conjunction with
2.7.2.2.12.Peak 5 End Time
to define the high
cost period.
2.7.2.2.12. Peak 5 End Time
Sets the end time of the high energy cost period 5.
Used in conjunction with
2.7.2.2.11.Peak 5 Start Time
to define the
high cost period.
Values
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
Values
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
Values
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
Values
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
Values
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
To Next Page
Loading...
