Functions
8.2 Calibration
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
111
In this function group you can use one or more calibration gases to calibrate the IR channels
of the ULTRAMAT 23 and to readjust the zero point and sensitivity. In addition, you can
calibrate the oxygen sensor and the pressure sensor and also define the AUTOCAL
parameters. The Fig. shown below indicates the menu sequence for an analyzer without H
2
S
sensor. The menu displays and their functions are described in the following sections.
The calibration functions can only be addressed if you have enabled code level 1.
To Next Page
Loading...
