Siemens ULTRAMAT 23 - Calibration: Infrared Measuring Range

Functions
8.2 Calibration
ULTRAMAT 23
112 Manual, 3/2016, A5E37100388-003
H
2
S sensor
If the analyzer is fitted with an H
2
S sensor, the input menu for the calibration functions is
changed. The following overview shows the menu sequence for the calibration functions of
the H
2
S sensor. The calibration functions of the H
2
S sensor are described in
section Calibration: H2S sensor (Page 118).
8.2.2
Calibration: Infrared measuring range
In this menu you can:
•
In line 2:
– Set the setpoints of the calibration gases for the
individual ranges
– Select a total or single calibration
•
In lines 3 and 4: Start a calibration procedure.
This function is specific to the component.