Functions
8.4 Configuration
ULTRAMAT 23
132 Manual, 3/2016, A5E37100388-003
With this function group you can assign relays and inputs/outputs and use special functions
and test functions. The following figure shows the associated menu sequence, further menu
sequences are shown under '842' and '843'. An explanation of the display elements can be
found in section Input mode (Page 96).
Access to the "Configuration" menu is protected by code level 2.
The special functions (menu display 842) are described in section Configuration: Special
functions (Page 142), the analyzer tests (menu display 843) in section Configuration: Device
test (Page 151).
To Next Page
Loading...
