Safety instructions
ULTRAMAT 23
16 Manual, 3/2016, A5E37100388-003
Note
Manipulation on the device
The physical access to the device allows illegal manipulations on the device.
Ensure that the device is located in a protected area to which only authorized persons
have access.
If no settings need be carried out, lock the device.
Toxic and/or corrosive gases
When measuring toxic or corrosive gases, it could occur that sample gas accumulates in
the analyzer because of leaks in the gas path.
To prevent the danger of poisoning or damage to parts of the analyzer, the analyzer or the
system must be purged with inert gas (e.g. nitrogen). The gas displaced by purging must be
collected using appropriate equipment and disposed of environmentally-friendly via an
exhaust line.
To Next Page
Loading...
