Siemens ULTRAMAT 23 - Page 208

Spare parts/accessories
13.5 IR analyzer units
ULTRAMAT 23
208 Manual, 3/2016, A5E37100388-003
Part
No.
Designation
Order No.
Remarks
1 *) IR source C79451-A3468-
B206
3 *) Chopper C79451-A3468-
B516
3 *)
Chopper
A5E35984159
Only variant -B06 'Cleaned for O
2
'
4 Plate with threaded bolts and
windows
C79451-A3468-
B514
4 Plate with threaded bolts and
windows
CA5E35984162 Only variant -B06 'Cleaned for O
2
'
5.1 Analyzer chamber C79451-A3468-
B235
Analyzer chamber 6 mm
5.1 Analyzer chamber A5E35982178 Analyzer chamber 6 mm;
only variant -B06 'Cleaned for O
2
'
6.1 Gas filter C79451-A3458-
B500
For CO
6.1
Gas filter
A5E35983013
For CO; only variant -B06 'Cleaned for O
2
'
7 *) Receiver chamber C79451-A3468-
B530
For CO
7 *)
Receiver chamber
A35984307
For CO; only variant -B06 'Cleaned for O
2
'
5.2 Analyzer chamber with O-ring C79451-A3468-
B233
Analyzer chamber 60 mm
5.2 Analyzer chamber with O-ring A5E35982163 Analyzer chamber 60 mm;
only variant -B06 'Cleaned for O
2
'
5.2.1
O-ring
C71121-Z100-A99
5.2.1 O-ring A5E35980590 Only variant -B06 'Cleaned for O
2
'
6.2 Gas filter C79451-A3468-
B542
For NO
6.2 Gas filter A5E35983036 For NO; only variant -B06 'Cleaned for O
2
'
8 Optical filter C79451-A3458-
B103
For NO **)
9 *) Receiver chamber C79451-A3468-
B520
For NO (channel 1)
9 *) Receiver chamber A5E35983178 For NO (channel 1);
only variant -B06 'Cleaned for O
2
'
*) Following replacement of this part, s
pecial work is required which can only be carried out by qualified personnel trained
for this task, for example temperature compensation, basic electronic adjustment etc.
**) Following replacement of this part, the water vapor cross-sensitivity must be checked.