CAUTION
Security risk with permanent opening
A door which is permanently open may pose a security risk. SimonsVoss
Technologies GmbH therefore recommends limiting the opening time in-
terval.
5. If you want to create another lock, select the checkbox Create an-
other.
9 With this checkbox you stay in this view after saving and can
immediately create another lock.
6. Click on the button SAVE .
9 The lock is created.
NOTE
Extended network settings are shown first if at least one SmartBridge has
been added and configured. Further online options, such as the interval for
"Door left open
", are visible once the DM locking devices have been pro-
grammed for the first time.
NOTE
In the case of SmartRelay 2, it is possible to invert the output (relay con-
tact), but you need to add and programme a SmartRelay first. The "OUT-
PUT CONFIGURATION" setting will then be visible with the "Invert output"
option in the SmartRelay properties. If you activate this option, the
SmartRelay needs to be reprogrammed.
MobileKey (Manual)
5. Basic functions
19 / 75
To Next Page
Loading...