ü Connected locks have status "ONLINE".
1. Click on the menu button .
9 Menu opens.
2. Click on the button NETWORK .
3. Click on the SmartBridge to be deleted.
4. Click the DELETE button.
9 The SmartBridge is flagged for deletion.
5. Start the network configuration by clicking the START CONFIGURA-
TION button.
6. The programming procedure (in this case, resetting the SmartBridge) is
performed. The SmartBridge can then be re-integrated in any Mo-
bileKey locking system.
6.2 Creating a lock with online upgrade
NOTE
Locking devices which have already been installed and programmed
without an online function can also be integrated into MobileKey ONLINE
retroactively. To do so, you merely need to replace the thumb-turn cover
(inside thumb-turn cover on FD locking devices, outer thumb-turn cover on
CO locking devices or added circuit board in SmartRelay)
with an online
thumb-turn cover containing a LockNode. Information on the exchange can
be found in the LockNode's quick guide. The new chipID for the LockNode
can then be added to the locking device in the web app.
MobileKey (Manual)
6. MobileKey online upgrade
41 / 75
To Next Page
Loading...