Trigger Description
Hardware error
A notification is sent as soon as a
hardware error is detected.
7.2 Important information
NOTE
All events are transmitted via the SmartBridge. You will not receive any no-
tifications about events if the Internet connection is malfunctioning or the
power supply has been interrupted. All events which occur during the time
period when the SmartBridge is not properly online.
NOTE
An "ALARM" type notification is recommended in any case. This is how you
can configure this event:
Creating rules [}56]
NOTE
Notifications of events are reported in real time only if the locking devices
have been networked with SmartBridge. Alarms are also recorded for non-
networked locking devices when a programming task is carried out on the
locking device concerned. All events and alarms can be displayed, filtered
and reset under "EVENT FEED
".
MobileKey (Manual)
7. Event management
58 / 75
To Next Page
Loading...