NOTE
Assignment of keys (transponders) with component list
Many successively programmed transponders are difficult to assign. You
do not need to mark these transponders. A unique ID is engraved on each
transponder. This ID is assigned to the name you specify. You can see this
assignment in the component list (see
Exporting the component list
[}30]
).
5.3 Add PIN code keypad
This chapter describes how to set up a PIN code keypad without online
upgrade. If you have a PIN code keypad with online upgrade, please
proceed as described in chapter
Adding a PIN code keypad with online
upgrade [}44]
.
MobileKey (Manual)
5. Basic functions
21 / 75
To Next Page
Loading...