Simons Voss Technologies MobileKey - Reset or Re-Use Deleted Components; Read Components

7. Assign the necessary authorisations (see Issue authorisation and save
[}22] ).
8. Click on the button SAVE .
9. Click on the menu button .
9 Menu opens.
10. Click on the button PROGRAMMING .
9 The programming app launches.
11. Carry out all tasks.
9 Programming is performed.
9.3 Reset or re-use deleted components
If you delete a SimonsVoss component, such as a key or locking device,
from the locking system without resetting it correctly beforehand, you can
still continue to use it:
ü Matrix screen open
1. Add the component concerned (e.g. key or transponder) to the locking
plan again.
2. Click on the menu button .
9 Menu opens.
3. Click on the button PROGRAMMING .
9 The programming app launches.
4. Complete all tasks.
9 The initial attempt to re-programme is acknowledged with an error
message.
5. Carry out the task again.
9 Component is now reprogrammed.
Always reset the components correctly to prevent this problem.
9.4 Read components
You can read all MobileKey components to see what their purpose is. This
might be important if you find a key, such as a transponder, to which you
are unable to assign to a user, for example.
How to read out MobileKey components:
1. Click on the menu button .
9 Menu opens.
2. Click on the button PROGRAMMING .
9 The programming app launches.
3. Click on the button READ DEVICE .
MobileKey (Manual)
9. Fault rectification
64 / 75