12 Tips & Tricks
12.1 Link to the web app
A direct link to the MobileKey web app can be established on all devices.
The web app can be launched particularly quickly and conveniently on your
desktop or home screen, even on smartphones and tablet PCs. Try it out!
12.2 Using keys without the USB config device
All keys (transponders) must be programmed using the USB config device
at the moment. This makes things particularly difficult when there is no
access to a Windows or Android device. You will find below a way in which
you can assign pre-programmed keys with any supported end device
without needing to use a USB config device:
ü Locks with ONLINE extension.
ü Locks with "ONLINE" status.
ü Matrix screen open
1. First of all, create a number of keys, such as Key Extra1, Extra2, Extra3
and so on.
9 These keys are not assigned authorisations to begin with.
2. Programme all keys once with the USB config device and make them
with a name if required.
9 A key can obviously also be read at a later point in time.
3. Instead of adding a new key and programming it with the USB config
device, simply change the properties of a key that you added previously,
such as "Extra1".
4. Click on the key you have already created, e.g. "Extra1" and select EDIT .
5. Change the name.
6. Optionally enter data for "Valid from" and "Valid to" .
7. Click on the SAVE button and return to the matrix.
9 Key is saved.
8. Authorise the key for all required locking devices.
9. Click on the button SAVE .
9 Programming takes place online via the SmartBridge.
9 Keys are authorised on selected locks.
12.3 Setting the language
You can very easily set the language for the web app. The following are
available:
English
Danish
MobileKey (Manual)
12. Tips & Tricks
71 / 75
To Next Page
Loading...