Programming with programming list
The second option is to programme using the programming list. This
method is suitable if many keys or locks have been changed in the matrix.
ü Matrix screen open
1. Click on the menu button .
9 Menu opens.
2. Click on the button PROGRAMMING .
9 Programming list opens.
3. Click on a component in the list which needs to be programmed.
4. Follow the instructions on the screen.
9 Component is programmed.
5. Click on the next component in the list to programme it.
9 Programming is complete.
5.7 Resetting components
Components can be easily reset. After a reset, they are in storage mode
and can be used in another system.
1. Click on the component you require.
9 Menu opens.
2. Click the DELETE button.
3. Click on the button PROGRAMMING .
9 The programming app launches.
4. Complete all tasks.
9 Component has been deleted from locking plan after successful
programming.
5.8 Forced component deletion
If a defective component cannot be reset without any difficulty (see
Resetting components [}29]
), it is possible to delete it from the locking
plan. A repeated deletion of the component leads to a forced deletion of
the component.
ü Component already deleted.
ü Component programmed previously.
1. Click on the component again.
2. Click the button FORCE DELETE and confirm the input.
MobileKey (Manual)
5. Basic functions
29 / 75
To Next Page
Loading...