NOTE
If you subsequently wish to edit the user PINs, click on the entry in the mat-
rix and select the
EDIT button from the menu.
IMPORTANT
Blocking after incorrect inputs
If a user PIN is entered incorrectly seven times, the SmartBridge continues
to reset reception, but the system blocks processing of entered user PINs
for three minutes. A relevant notification is displayed in the messages on
the web app.
6.5 Deleting a PIN code keypad with online upgrade
ü SmartBridge added (See
Setting up SmartBridges [}39]
).
ü Network set up and functioning (see
Configure network [}46]
).
ü The online status of the online PIN code keypad you wish to delete
"ONLINE
".
1. Click on the menu button .
9 Menu opens.
2. Click on the button NETWORK .
3. In the NETWORK menu, click the online PIN code keypad you wish to
delete.
4. Click the DELETE button.
9 The online PIN code keypad is flagged for deletion.
5. Start the network configuration by clicking the START CONFIGURA-
TION button.
9 Programming process is implemented
(in this case: reset)
.
9 The online PIN code keypad can then be re-integrated into any
MobileKey locking system after it has been reset to the delivery
status (see supplied quick guide).
9 Online PIN code keypad is deleted.
MobileKey (Manual)
6. MobileKey online upgrade
45 / 75
To Next Page
Loading...